CompetitionPlus.com Forum  

Go Back   CompetitionPlus.com Forum > Competition Collectibles

Reply
 
Thread Tools Display Modes
  #1  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default 1:8 scale '69 camaro pro mod (mike hill's car)

as most of you have figured out i have some friends at precision chassis in pottstown, pa. they recently completed mike hill's '69 camaro pro mod. i'm going to try to reproduce this car in 1:8 scale as to the best of my abilities. to start with there are no '69 camaro bodies available in 1:8 scale to even try to modify into the cynergy body that is on mike's car. so, i contacted a 3-d artist in brazil and with measuring tape in hand i got the basic dimensions and he proceeded to work up a 3-d drawing of a close proximity to but, not exactly like the cynergy body. next the drawing was sent to a company called TDR. tim at TDR worked the drawing so a 3-d printed body could be made. here are a few of the 3-d renderings from dan palatnik (the 3-d artist)







here is the 3-d printed body.

__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #2  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default

here are a few more of the body.



one with my hand in there, for a size reference.



a little about the car. the camaro has a 5.20 bore space gene fulton motor in it with a bruno and a lenco 2 speed. front struts and a 4 link rear suspension coupled with a fabricated ford 9" rear. lots of titanium and carbon fiber everywhere.

so, i started by fabricating a ford 9" floater rear in brass.



__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #3  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default

here is some more of the rear.







__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #4  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default

here the center section of the ford rear.



next came the lenco and the bruno torque converter drive.





shift pod.

__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #5  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default

next i had to machine a set of 4 braswell 2 barrel carbs from aluminum just 'cause they're so cool looking. they're not quite finished yet but i think you'll get a kick out of them.





now we get to the fun part. i started on the fulton power plant. the block is a dart billet piece so that's where i started.



__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #6  
Old 05-12-2012
comp1839's Avatar
comp1839 comp1839 is offline
Senior Member
 
Join Date: Dec 2010
Location: pottstown, pa.
Posts: 186
Default





next a jesel belt drive and an ATI damper with an MSD crank trigger.



a moroso 2 piece oil pan finishes the bottom end.



please remember almost everything you see here is hand machined by me.
__________________
never poke a sleeping bear with a pointed stick.

http://s243.photobucket.com/home/comp1839
Reply With Quote
  #7  
Old 03-20-2017
shaketown dave's Avatar
shaketown dave shaketown dave is offline
Senior Member
 
Join Date: Aug 2009
Location: lake isabella,ca
Posts: 1,644
Default

added daves work to my favorites.unbelieveable.blown away before,his work is just awesome.thanks for postin this man.wish he would come on here again
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.