Hilton Zapada on Scale Outlaw Drag Cars:
Joe Marteusz Sr. on Scale Outlaw Drag Cars:
"41 Willy’s motor is finally in still need to do the dry sump and blower straps then onto the shifter and interior. Screams fast !!!"
Hilton Zapada at Scale Outlaw Drag Cars:
Roy Sorenson from Plastic Model Builder's Garage:
"A Viper V10 I'm building for a Pro Street SuperBird. The basic motor is out of a snap kit. The manifold is a 3D printed crossram original for a V12. I cut the front and back runners off to make it a V10. I also cut off the 3D printed velocity stacks and replaced them with aluminum stacks. I mounted the ignition coils in the valley under the manifold. It took a little patience to feed the spark plug wires through the manifold, but this is the 'clean' look I was trying to accomplish. Now I need to mount an A/C compressor and build a pulley drive (plus a little more wiring on the motor)."
... some old JPS wheels (from the spare parts box too). First Mock up, I'm pretty happy so far...
That's a 69 Dodge Daytona, not a 70 Plymouth Superbird.
Lonnie Crttenden on OLD SCHOOL DRAG CAR MODELS:
Jairus Watson from Scale Survivors:
"Built in 1977. 1/24th scale based on a Revell Schumacher kit." (Click on pics to enlarge)
what a nightmare that would be to service between rounds!
A working RC dyno!
From OLD SCHOOL DRAG CAR MODELS:
click on pic to enlarge
An ad published in Car Craft, November 1974...
"Only $7, or less!"
Brett Tynan at Scale Outlaw Drag Cars:
"got all the tinwork done, doors and guards pinned chassi primed, now to re start on the motor"
(Click on pics to enlarge)
New cover photo at H&S SCALE MODEL GARAGE:
Joe Woellner's amazing work at HOTRODZRUS CAR & TRUCK MODEL BUILDERS GROUP:
"Vintage FED, 1966, 150" chassis, 1:25 brass build, just completed.
Aluminum body, cast nickel rear wheels, laced wire 40 spoke runners, scratch injection setup and I'll make a wire wheel lacing tutorial here as a new topic. I've been at this intensively with this project, and the previous dragster, so I think to have a simplified method. new topic coming up."
Tyrone Price once again with one of his fantastic builds:
"My Galaxie trailer"
Joe Cardoza at Quarter Mile Modelers:
Nick Bradshaw at Quarter Mile Modelers:
"ProMod 68 Camaro. Resin body, chassis built out of Evergreen styrene."
"55 Chevy ProMod"
"ProMod 58 Plymouth Christine. Lengthened the chassis, engine from Jukebox Ford, supercharged, modified the valve covers to represent Hemi. Scratchbuilt wheely bars."
"41 Willys ProMod. She's a little rough, but my first attempt at major body Mods, roll cage front suspension. Finished a couple years ago."
Ron Holman from 50+SCALE MODELER STREET RACING OUTLAWS:
Click on pic to enlarge
Richard Martin from American Scale Modeler
Eric Gannon on Traxxas Extreme Customs
Vinnie Bentley from Quarter Mile Modelers: "I USED TO BUILD 1/24 - 1/25 SCALE BUT THESE DAYS I JUST BUILD LIFESIZE 😎"
(click on pics to enlarge)
Tommy May from Model Cars & Trucks:
Pat Cardinal from Plastic Model Builder's Garage.
Mark Caterina from CHUCK'S 60's- 80's DRAG RACING MODEL CAR DECALS: "So far so good"
Mark Hagan from 50+SCALE MODELER STREET RACING OUTLAWS.
John Collet from Scale Outlaw Drag Cars
Tyrone Price from Scale Outlaw Drag Cars
Tyrone Price at Facebook Model Car Builders
Rich Text Editor.
To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph.
An inline formatting menu will show up when you select text. Hit tab to get into that menu.
Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.